JGD-KXT poly rubber joint

JGD-KXT poly rubber joint has the features of high pressure resistance, heat resistance, aging resistance etc

 JGD-KXT poly rubber joint has the features of high pressure resistance, heat resistance, aging resistance, with good flexibility, big displacement value, easy for installation. Its effect on shock adsorption and noise reduction is very obviously. It is widely used for water supply, water discharge, pump, heating ventilation, air conditioning, fan, compressor, chemical, drug manufacturing and paper making pipeline systems.

Technical conditions:

Items/model	JGD-1	JGD-2	JGD-3
Working pressure MPa ( kgf/cm 2 )	1(10)	1.6(16)	2.5(25)
Bursting pressure MPa( kgf/cm 2 )	2(20)	3(30)	4.5(45)
Vacuum KPa(mm/Hg	53.3(400)	86.7(650)	100(750)
Applicable temperature °C	-15°C~115°C (special can be up to -30°C~250°C)
Suitable medium	Air, compressed air, water, sea water, hot water, oil, acid. Alkali etc.

Note:

If have special requirements, please send us drawing for us to produce it customized. Flange is according to <National nominal water supply and drain standard drawings>, the others are according to HG/T2289-92DN350-600(2) type working pressure is 1.6MPa, DN32-400(3) type working pressure is 2.5MPa.DN700-DN1200 type working pressure is 1.0MPa, DN1400 working pressure is 0.6MPa,DN1600-DN18000 working pressure is 0.4MPa, flange selection according to 0.6MPa. DN2000 working pressure is 0.25MPa, flange selection according to 0.6MPa. Overhead water supplying and use above DN200, pipeline must have fix supports or fix bracket, or product need to install dropping off prevent device. Users use rubber joint, the matched flange should be valve flange or according to GB/T9115.1(RF) flange.

JGD-KXT poly rubber joint